Table of Contents
Advertisement
SONET_Usr.bk Page 144 Wednesday, December 13, 2000 11:11 AM
Storing, Logging and Printing
Logging Results
1 Choose LOGGING [ON] - enables the logging of results and alarms.
HOW TO:
2 Choose LOGGING PERIOD - determines how regularly the results and alarms
3 Choose RESULT LOGGED - allows you to log all results to or choose only those
4 Choose WHEN - allows you to choose to only log when the error count for the
5 Choose CONTENT - allows you a choice of error results to be logged.
6 If LOG ERROR SECONDS [ON] is chosen a timed and dated message is logged
7 Choose the logging DEVICE.
144
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• External Parallel Port printer (option 601)
• Internal Disk Drive
are logged.
USER PROGRAM provides a choice of 10 minutes to 99 hours.
results you require.
logging period is greater than 0. If the error count is 0 then the message NO BIT
ERRORS is displayed.
Error Results, Analysis or Error and Analysis (ER & ANAL)
and
Period, Cumulative or Period and Cumulative (PER & CUMUL).
each time an error second occurs (excessive occurrences of error seconds during
the logging period will result in heavy use of printer paper).
If RS232 is chosen, see "Logging Results to RS-232-C Printer " page 151.
If GPIB is chosen, see "Logging Results to GPIB Printer " page 149.
If PARALLEL is chosen, see "Logging Results to Parallel (Centronics) Printer
" page 148.
Advertisement
Table of Contents
