Table of Contents
Advertisement
SONET_Usr.bk Page 125 Wednesday, December 13, 2000 11:11 AM
Description
HOWTO
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Tandem Connection Monitoring
Viewing TCM Errors and Alarms
Viewing TCM Errors and Alarms
TCM error and alarm results can be viewed on the RESULTS page.
1 Press the
key.
RESULTS
2 Select
in the RESULTS field.
SDH RESULTS
3
gives a summary of all possible SDH/TCM measurements
ERROR SUMMARY
and errors/counts and can be set up to be read as counts (total in measurement
interval) or ratios/rates.
4
errors give the number of errors and counts which have
CUMULATIVE
occurred in total since the last time
5
errors give the number of errors and counts which have
SHORT TERM
occurred in the last measurement interval. This measurement interval is set up on
the results page when
TIMING CONTROL
field.
See next page for an example of the Alarms Results page
RUN/STOP
was pressed.
has been selected in the RESULTS
125
Advertisement
Table of Contents
