Table of Contents
Advertisement
SONET_Usr.bk Page 160 Wednesday, December 13, 2000 11:11 AM
Using Instrument and Disk Storage
Storing Configurations in Instrument Store
Storing Configurations in Instrument Store
Description
You can store measurement settings which are used regularly and recall them with a
single operation.
One preset store is provided which cannot be overwritten, STORED SETTING
NUMBER [0]. This store is used to set the instrument to a known state, the
FACTORY DEFAULT SETTINGS.
1 Set the OmniBER 720 to the configuration you wish to store.
HOW TO:
2 Choose the STORED SETTING NUMBER to receive the configuration.
3 Choose LOCK
4 Choose ACTION
5 To add a descriptive title see "Titling Configuration in Instrument Store "
160
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
.
OFF
to store the configuration in the chosen store.
SAVE
page 161.
Advertisement
Table of Contents
