Table of Contents
Advertisement
SONET_Usr.bk Page 173 Wednesday, December 13, 2000 11:11 AM
Description
HOW TO:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Using Instrument and Disk Storage
Saving Configurations to Disk
Saving Configurations to Disk
A large number of measurement settings which are used regularly can be stored (as
configuration files) on disk and recall when required.
Disk can be used in other instruments which have the same option structure.
1 Set the OmniBER 720 to the configuration you wish to store.
2 Choose the directory in which you wish to save the OmniBER 720 configuration.
See "Accessing Directories and Selecting Files " page 165.
3 Choose DISK OPERATION
the filename using
PREVIOUS CHAR NEXT CHAR
twice and use the pop-up keypad.
The filename extension is fixed as .CNF.
The filename can contain up to 8 alphanumeric characters.
4 Choose
to save the current configuration to disk.
OK
If you have entered a filename which already exists, a warning "File exists - are
you sure you wish to continue" is displayed.
If YES is selected, the configuration will be saved.
To cancel, change OK to OFF and enter new filename. See "Accessing
Directories and Selecting Files " page 165.
, FILE TYPE
SAVE
CONFIGURATION
and enter
or press
SET
173
Advertisement
Table of Contents
