Table of Contents
Advertisement
SONET_Usr.bk Page 156 Wednesday, December 13, 2000 11:11 AM
Storing, Logging and Printing
Changing Internal Printer Paper
NOT E
The paper must be installed such that when it is in the print mechanism, the sensitive
side (slightly shiny) is the underside.
The illustrations here show the correct fitting for 9270-1360 paper which has the
sensitive side on the outside of the roll.
5 Feed the paper into the upper entry of the print mechanism. When the front cover
CA UTI O N
Do not close the outer cover until the automatic paper feed is complete.
156
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SET BLUE ADAPTOR A4 LEFT - 8.5in RIGHT
of the print mechanism is closed, the printer should automatically feed the paper
through until there is approximately 2.5 cm (1 in) clear at the front of the print
mechanism.
Align paper with the leftmost edge of the printer
mechanism slot
INSERT PAPER
Advertisement
Table of Contents
