Table of Contents
Advertisement
SONET_Usr.bk Page 120 Wednesday, December 13, 2000 11:11 AM
Tandem Connection Monitoring
Adding TCM errors
Adding TCM errors
Description
The following TCM errors can be generated in the OmniBER:
TC-IEC
TC-REI
OEI
TC-BIP
HOWTO
1 Press the
2 Select the
3 Set the TCM PATH field to
4 Select the
5 Set the TEST FUNCTION field to
6 Select the ERROR ADD TYPE field and choose an Error Type, also select the
120
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Incoming Error Count (on N1 only).
Remote Error Indication.
Outgoing Error Indication.
TC-BIP Error (on N2 only)
TRANSMIT
key and select
MAIN SETTINGS
HIGH ORDER
TEST FUNCTION
Error Rate.
SDH
.
folder.
or
LOW ORDER
folder as shown above.
and select
SDH
ERRORS & ALARMS
as required.
.
Advertisement
Table of Contents
