Table of Contents
Advertisement
SONET_Usr.bk Page 199 Wednesday, December 13, 2000 11:11 AM
HOW TO:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Selecting and Using "OTHER" Features
Running Self Test
If TEST STATUS [FAIL nnn] is displayed, the OmniBER 720 should be returned
to a service office for repair.
Run Confidence TESTS
1 Choose TEST TYPE
CONF. TESTS
2 Insert a formatted disk into the instrument disk drive.
3 Connect Optical OUT to Optical IN via a 15 dB attenuator.
4 Press
to activate the Self Test. TEST STATUS RUNNING will be
RUN/STOP
displayed.
The information pertaining to TEST TYPE, TEST NUMBER and SUBTEST
NUMBER will change as the Self Test progresses.
If the OmniBER 720 is functioning correctly, after a time of 2 to 3 minutes, TEST
STATUS PASSED is displayed.
If TEST STATUS [FAIL nnn] is displayed, the OmniBER 720 should be returned
to a service office for repair.
on the
OTHER
SELF TEST
display.
199
Advertisement
Table of Contents
