Table of Contents
Advertisement
SONET_Usr.bk Page 121 Wednesday, December 13, 2000 11:11 AM
Description
HOWTO
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Tandem Connection Monitoring
Adding TCM Alarms
Adding TCM Alarms
There are four alarms that can be generated and detected in the OmniBER, they are:
TC- LOM
Tandem Connection Loss of Multiframe.
TC-RDI
Tandem Connection Remote Defect Indicator.
TC-IAIS
Incoming AIS.
ODI
Outgoing Defect Indicator.
1 Press the
TRANSMIT
key and select
2 Select the
MAIN SETTINGS
3 Set the TCM PATH field to
4 Select the
TEST FUNCTION
5 Set the TEST FUNCTION field to
6 Select the ALARM TYPE field and choose an Alarm Type.
SDH
.
folder.
or
HIGH ORDER
LOW ORDER
folder as shown above.
and select
SDH
ERRORS & ALARMS
as required.
.
121
Advertisement
Table of Contents
