Table of Contents
Advertisement
4.1.1
Control panel
1
2
3
4
8
9
7
Img.4-1:
Control panel
Pos.
Designation
Digital position indicator
1
Vertical spindle "Left-handed rotation"
2
Vertical spindle "Rotation off"
3
Vertical spindle "Right-handed rotation"
4
Coolant "On"
5
Coolant "Off"
6
4.2
Switching the milling machine on
ATTENTION!
Wait until the milling machine has come to a complete halt before changing the rotation
direction using the rotation direction switch.
Switch on the main switch.
If required, turn the emergency-stop push button to the right in order to release the push
button.
Set and close the spindle protection.
Switch the control on.
INFORMATION
The control turns on only when all actuators such as the
feed lever is in the neutral position.
Switch the control on.
Press the push button for vertical milling or horizontal
milling. Observe the direction of rotation.
The milling machine switches on and turns in the preselected rotation direction.
EN
MT60
30
5
6
10
11
Translation of original instruction
Item
Designation
Control "On"
7
Horizontal spindle "Left-handed rotation"
8
Horizontal spindle "Rotation off"
9
Horizontal spindle "Right-handed rotation"
10
Emergency stop button
11
Img.4-2:
Spindle guard
Operation
Version 1.0.4 - 2020-08-04
Advertisement
Table of Contents
