Table of Contents
Advertisement
4.7
Spindle sleeve feed
4.7.1
Manual spindle sleeve feed
Actuate the quill lever in order to manually lift respectively lower the quill.
You can set the spindle sleeve to a given height using the tightening lever.
ATTENTION!
For all movements of the spindle sleeve you must first loosen the tightening lever!
4.7.2
Automatic spindle sleeve feed
0.08 │ 0.25 │ 1 mm/rev
Set the feed rate.
Pull out the spindle sleeve lever.
The lever is released when the depth stop comes
into contact with the adjusting nut.
Switch on the clockwise spindle rotation.
4.7.3
Quill fine feed
Turn the lever clockwise. The sleeve lever moves to the spindle head and activates the cou-
pler of the fine feed.
Turn the quill fine feed handwheel in order to move the quill.
Fine feed hand wheel spin-
dle sleeve
Adjusting nut
Depth stop
Spindle sleeve lever
Spindle sleeve clamping
lever
Operation
Version 1.0.4 - 2020-08-04
Img.4-6: Spindle sleeve feed
Translation of original instruction
Img.4-5:
Selector switch for spindle sleeve feed
Spindle sleeve lever
Lever for activating fine feed
MT60
EN
33
Advertisement
Table of Contents
