OPTIMUM
M A S C H I N E N - G E R M A N Y
5
User interface, machine control panel
5.1
Screen arrangement
Excerpt from the manual of the operating instructions for "SINUMERIK 828 D"
Img.5-1:
Screen arrangement
1. Active operating area and operating mode
2. Alarm-/message row
3. Program name
4. Channel condition and program influence
5. Channel operation messages
6. Position indication of the axes in the actual value window
7. Display for
- active tool T
- current feed F
- active spindle in current condition (S)
- Spindle utilization in percent
8. Working window including program record display
9. Display of active G functions, all G functions, H functions and input window for different func-
tions (for example, skip blocks, program control)
10. Dialogue row for the transfer of additional user instructions
11. Horizontal softkey bar
12. Vertical softkey bar
GB
F150
Page 54
Original operating instructions
User interface, machine control panel
Version 1.1.6 dated 2014-10-16