Inclined Plane; Entering The Parameters; Positioning To A Coordinate Point On The Inclined Plane - Optimum OPTImill MT 60 Operating Manual

5.8

Inclined Plane

Creates an inclined plane in a coordinate system such that processes can be carried out on
said inclined plane.
The parameters are displayed in the Rotation Speed field.

The last entered value of each parameter is shown in the row of the X axis.

Entering a new value is specified in the row of the Y axis.

5.8.1

Entering the parameters

Parameter
1 - 1 CL_A
2 - 1 CL_A
3 - 1 CL_A
Press the key
To enter the angle of the inclined plane, use the numeric keys
and confirm with the
5.8.2

Positioning to a Coordinate Point on the Inclined Plane

Parameters
1A _angle entered
2A_angle entered
3A_angle entered
The machine axes proceed until the positions of the selected coordinate plane read 0.000.
INFORMATION
Press the button
display status. Press the 0 key again to continue with the function.
Press the button
EN
DPA21
50
Description
Angle of the inclined plane on the coordinate plane: X-Y
Angle of the inclined plane on the coordinate plane: Y-Z
Angle of the inclined plane on the coordinate plane: X-Z
to select X-Y, Y-Z or X-Z as the coordinate plane.
key.
Description
Inclined plane: X-Y
Inclined plane: Y-Z
Inclined plane: X-Z
to temporarily interrupt the function. The display returns to the normal
to exit from the function.
Translation of original instruction
Operation
Version 1.0.4 - 2020-08-04