Arc; Entering The Parameters - Optimum OPTImill MT 60 Operating Manual

5.9

Arc

Creates an arc in a coordinate system such that processes can be carried out on said arc.
The parameters are displayed in the Rotation Speed field.

The last entered value of each parameter is shown in the row of the X axis.

Entering a new value is specified in the row of the Y axis.

5.9.1

Entering the parameters

Parameter
1 - 1 ACE
2 - 1 ACE
3 - 1 ACE
Press the key
To enter the end midpoint of the arc, use the numeric keys
and confirm with the
Parameter
1 - 2 5E_d
2 - 2 5E_d
3 - 2 5E_d
To enter the end radius of the arc, use the numeric keys
and confirm with the
Operation
Version 1.0.4 - 2020-08-04
Description
Midpoint of the arc on the coordinate plane: X-Y
Midpoint of the arc on the coordinate plane: Y-Z
Midpoint of the arc on the coordinate plane: X-Z
to select X-Y, Y-Z or X-Z as the coordinate plane.
key.
Description
Radius of the arc on the coordinate plane: X-Y
Radius of the arc on the coordinate plane: Y-Z
Radius of the arc on the coordinate plane: X-Z
key.
Translation of original instruction
DPA21 EN
51