Coordinate Points Along A Diagonal Line; Entering The Parameters - Optimum OPTImill MT 60 Operating Manual

5.6

Coordinate points along a diagonal line

Creates a line within a coordinate system, along which a specified number of uniformly spaced
coordinate points are defined.
The parameters are displayed in the Rotation Speed field.

The last value entered for each parameter is displayed in the X axis row.

Enter new values in the Y axis row.

5.6.1

Entering the Parameters

Parameters
1 - 1 L_A
2 - 1 L_A
3 - 1 L_A
Press the key
To enter the angle of the line, use the numeric keys and confirm with the
Parameters
1 - 2 L_d
2 - 2 L_d
3 - 2 L_d
To enter the length of the line, use the numeric keys and confirm with the
Parameters
1 - 3 L .H
2 - 3 L .H
3 - 3 L .H
To enter the number of coordinate points, use the numeric keys
and confirm with the
EN
DPA21
46
Description
Angle of the line on the coordinate axis: X-Y
Angle of the line on the coordinate axis: Y-Z
Angle of the line on the coordinate axis: X-Z
to select X-Y, Y-Z or X-Z as the coordinate axis.
Description
Length of the line: X-Y
Length of the line: Y-Z
Length of the line: X-Z
Description
Number of coordinate points: X-Y
Number of coordinate points: Y-Z
Number of coordinate points: X-Z
key.
Translation of original instruction
key.
key.
Operation
Version 1.0.4 - 2020-08-04