Control Panel; Switching Elements - Optimum Optimill MT 50 Operating Manual

5.2.1 Control panel

Position display DPA2000
Vertical milling
Push button spindle "forward"
Push button spindle "OFF"
Push button spindle "reverse"
Step switch "HIGH/ LOW"
(For a description please see below)
Horizontal milling
Push button spindle "reverse"
Push button spindle "OFF"
Push button spindle "forward"
5.2.2

Switching elements

Vertical milling
Stage switch "High Speed"/ "Low Speed"
The operating mode "High Speed or Low Speed" is selected by means of the stage switch. The
stage switch "High" and "Low" must only be used for vertical milling.
Gear stage "H" (High speed)
Gear stage "L" (Low speed)
Push button spindle "forward"
The push button switches on the rotation of the spindle.
Main switch
The push button "OFF" switches off the rotation of the spindle.
Push button spindle "reverse"
The push button switches on the rotation of the spindle.
Horizontal milling
Push button spindle "forward"
The push button switches on the rotation of the spindle.
Main switch
The push button "OFF" switches off the rotation of the spindle.
Push button spindle "reverse"
The push button switches on the rotation of the spindle.
GB MT50
30
Img.5-2: Control panel
Translation of original operating manual
Push button coolant pump "ON"
Push button coolant pump "OFF"
Push button "Control ON" and "indica-
tor light"
Emergency stop
Version 1.2.8 - 2020-08-03