Positioning To Coordinate Points - Optimum OPTImill MT 60 Operating Manual

Parameter
1 - 5 E_A
2 - 5 E_A
3 - 5 E_A
To enter the end angle on the coordinate plane, use the numeric keys
and confirm with the
5.7.2

Positioning to coordinate points

Parameter
1Cho
2CHo
3CHo
To select the desired coordinate point, press the
Press button
The machine axes will proceed until the positions of the selected coordinate axes read 0.000.
INFORMATION
Press the button
display status. Press the 0 key again to continue with the function.
Press the button
Operation
Version 1.0.4 - 2020-08-04
Description
End angle: X-Y
End angle: Y-Z
End angle: X-Z
key.
Description
Coordinate point no.: X-Y
Coordinate point no.: Y-Z
Coordinate point no.: X-Z
to select the desired coordinate point.
to temporarily interrupt the function. The display returns to the normal
to exit from the function.
Translation of original instruction
button.
DPA21 EN
49