5.6.2
Positioning the Coordinate Points
Parameters
1LHo
2LHo
3LHo
To select the desired coordinate point, press the
To select the previous coordinate point, press the
The machine axes proceed until the positions of the selected coordinate point read 0.000.
INFORMATION
Press the button
display status. Press the 0 key again to continue with the function.
To exit from the function, press the
5.7
Coordinate Points on a Circle or Arc
Creates a circle or arc within a coordinate system, along which a specified number of uniformly
spaced coordinate points are defined.
The set coordinate points on the circle or arc run counterclockwise. Coordinate point 2 is
located counterclockwise of coordinate point 1.
The parameters are displayed in the Rotation Speed field.
The last entered value of each parameter is shown in the row of the X axis.
Entering a new value is specified in the row of the Y axis.
Operation
Version 1.0.4 - 2020-08-04
Description
Coordinate point no.: X-Y
Coordinate point no.: Y-Z
Coordinate point no.: X-Z
to temporarily interrupt the function. The display returns to the normal
button.
Translation of original instruction
button.
button.
DPA21
EN
47