Authorized Persons - Optimum OPTImill MT 60 Operating Manual

Operator
The operator has been instructed by the operating company regarding the assigned tasks and
possible risks in case of improper behaviour. Any tasks which need to be performed beyond the
operation in standard mode must only be performed by the operator, if so indicated in these
instructions and if the operator has been expressively commissioned by the operating com-
pany.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.7.2

Authorized persons

INFORMATION
Sufficient expertise is required for working on the milling machine. No one must work on
the machine without having the necessary training, not even for a short while.
WARNING!
Inappropriate operation and maintenance of the milling machine constitutes a danger to
the personnel, objects and the environment. Only authorized personnel may operate the
milling machine !
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
Obligations of the operating company
train the personnel,

instruct the personnel in regular intervals (at least once a year) on

- all safety regulations relevant to the milling machine,
- operation of the milling machine,
- generally accepted engineering standards.
- possible emergency situations,
check the personnel's knowledge level,

document training/instruction in a operation book,

require personnel to confirm participation in training/instructions by means of a signature,

check whether the personnel is working safety and risk-conscious and observes the operat-

ing instructions.
Define and document the machine inspection deadlines in accordance with section 3 of the

Factory Safety Order and perform an operational risk analysis in accordance with section 6
of the Safety at Work Act.
Safety
Version 1.0.4 - 2020-08-04 Translation of original instruction
Obligations of the
operating
company
MT60 EN
11