Entering The Parameters - Optimum OPTImill MT 60 Operating Manual

5.7.1

Entering the parameters

Parameter
1 - 1 CCE
2 - 1 CCE
3 - 1 CCE
To select X-Y, Y-Z or X-Z as the coordinate plane, press the
To enter the midpoint of the circle on the coordinate plane, use the numeric keys and confirm with the
key.
Parameters
1 - 2 C_d
2 - 2 C_d
3 - 2 C_d
To enter the diameter of the circle or arc, use the numeric keys and confirm with the
Parameters
1 - 3 .H
C
2 - 3 .H
C
3 - 3 .H
C
Input the number of coordinate points using the numeric keys
and confirm with the
Parameters
1 - 4 5_A
2 - 4 5_A
3 - 4 5_A
To enter the start angle on the coordinate plane, use the numeric keys
and confirm with the
EN
DPA21
48
Description
Coordinate plane of the circle: X-Y
Coordinate plane of the circle: Y-Z
Coordinate plane of the circle: X-Z
Description
Diameter of the circle or arc in the coordinate plane: X-Y
Diameter of the circle or arc in the coordinate plane: Y-Z
Diameter of the circle or arc in the coordinate plane: X-Z
Description
Number of coordinate points: X-Y
Number of coordinate points: Y-Z
Number of coordinate points: X-Z
key.
Description
Start angle: X-Y
Start angle: Y-Z
Start angle: X-Z
key.
Translation of original instruction
key.
key.
Version 1.0.4 - 2020-08-04
Operation