Cp Piv System Utility Card Features - Nortel Communication Server 1000E Maintenance Manual

40 Hardware maintenance tools
CP PIV faceplate LEDs
The CP PIV faceplate features the following 5 LEDs:
•
PWR – Solid Green – Power Good
•
CF – Flashing Green shows activity on compact flash cards CF1 or
CF2.
•
HDD – Flashing Green shows activity on secondary IDE bus (not used)
•
LAN1 – ELAN Activity
•
LAN2 – HSP Activity
—
—
—

CP PIV System Utility card features

The System Utility card maintenance display indicates the status of the CP
PIV Call Processor, either active or standby. The display also provides
an indication of normal and fault conditions as well as the progress of
software upgrades and backups.
Figure 6 "System Utility card display for standby Call Processor" (page
40) shows the System Utility card display for a standby Call Processor.
Figure 6
System Utility card display for standby Call Processor
CAUTION
SERVICE INTERRUPTION
During a sysload, active calls are disconnected and the system
goes into an emergency line transfer state. Use the reset button
only when specifically instructed to do so in an NTP.
Flashing Yellow – 10 MB
Flashing Green – 100 MB
Flashing Amber – 1000 MB (1 GB)
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.