Clearing Terminal Server Faults; Clearing Ip Phone Faults - Nortel Communication Server 1000E Maintenance Manual

100 Clearing faults

Clearing Terminal Server faults

One potential fault that can occur with the MRV Terminal Server is
database corruption. When there is a database fault, all Terminal Server
LEDs flash and the console port does not respond.
To correct this fault, configure all parameters to factory default as
described in MRV procedures.
ATTENTION
To prevent database corruption in the MRV Terminal Server, never remove
the Flash card or power down the Terminal Server while the Flash card LED
is illuminated.

Clearing IP Phone faults

For IP Phone fault clearing procedures, see IP Phones Fundamentals
NN43001-368 and IP Line Fundamentals.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.