Clearing Faults; Contents; Fault Clearing Process - Nortel Communication Server 1000E Maintenance Manual

.

Clearing faults

Contents

This section contains the following topics:
•
"Fault clearing process" (page 71)
•
"Fault indicators" (page 73)
•
"Clearing Core Call Server faults" (page 75)
•
"Clearing Signaling Server faults" (page 80)
•
"MG 1000E faults" (page 82)
•
"Clearing Core faults" (page 88)
•
"Clearing MG 1000E Expansion faults" (page 91)
•
"Clearing trunk faults" (page 97)
•
"Clearing Terminal Server faults" (page 100)
•
"Clearing IP Phone faults" (page 100)

Fault clearing process

To clear a fault in the CS 1000, follow the steps in
a fault in the CS 1000" (page
Procedure 5
Clearing a fault in the CS 1000
Step
1
2
Action
Observe and record all fault indicators, system messages, and
user reports.
Look up all system messages in Software Input/Output
Reference – System Messages NN43001-712.
The interpretation of the message can identify faulty equipment
and tell you what action to take to clear the problem. If you
cannot clear the fault using a Maintenance Application or through
information inSoftware Input/Output Reference – Maintenance
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
Procedure 5 "Clearing
71).
71