Replacing The Ntdw65 Voice Gateway Media Card; Replacing The Nt4N39Aa Cp Piv Call Processor Card - Nortel Communication Server 1000E Maintenance Manual

134 Replacing equipment

Replacing the NTDW65 Voice Gateway Media Card

Procedure 21
Replacing the NTDW65 Voice Gateway Media Card
Step
1
2
3
4
5
6
7
8

Replacing the NT4N39AA CP PIV Call Processor card

Procedure 22
Replacing the NT4N39AA CP PIV Call Processor card
Step
1
Action
In Element Manager, select System > Maintenance from the
navigator.
The Maintenance Web page appears. You can select an
overlay or a function to perform maintenance. The default is
overlay.
Select Select by Functionality.
A list of available diagnostics appears.
Select Network & Peripheral Equipment Diagnostics.
The Network & Peripheral Diagnostics page appears.
Select DISC – Disable specified card from the Card
Commands list.
Enter the card number in the corresponding Command
Parameter text box.
Click Submit to the right of the text box.
The output from this command is shown in the text box in the
lower half of the web page.
Remove the card:
a Label and remove all cables.
b Unhook the locking devices.
Install the replacement card:
a Pull the top and bottom locking devices away from the card
faceplate.
b Hook the locking devices.
Action
Check the System Utility card maintenance display to verify that
the Call Processor containing the CP PIV card to be replaced
is inactive.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
--End--