116 Replacing equipment
21
22
Figure 18
CP PM BIOS setup
Figure 19 "CP PM BIOS reset" (page 116)
reset CMOS to factory defaults.
Figure 19
CP PM BIOS reset
The system reboots. Once the reboot is complete, the new BIOS
version is displayed. Verify that the BIOS version is correct. You
can now proceed with the Linux software installation.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
appears. Press y to