154 Replacing equipment
9
10
11
12
13
Reconnect the LED connector that was disconnected in
necessary.
Record the MAC address of the new IP daughterboard installed
on the SSC in the Media Gateway. When necessary use LD 117
to configure the new MAC address for the Media Gateway. See
Communication Server 1000E Installation and Commissioning
(NN43041-310).
Reinstall the NTDK20 SSC circuit card in slot 0 of the Media
Gateway.
Reconnect the IP cable to the Media Gateway bulkhead.
Power up the system.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
--End--
step 4
if
Need help?
Do you have a question about the Communication Server 1000E and is the answer not in the manual?