Nortel Communication Server 1000E Maintenance Manual page 184

184 pbxLink connection
Displaying pbxLink information
Element Manager (EM)
To display pbxLink information in Element Manager, use the
pbxLinkShow command, as shown in
information in Element Manager" (page
To access the pbxLinkShow command in EM, dfollow the steps in
Procedure 44 "Displaying pbxLink information in Element Manager" (page
184).
Figure 53
Displaying pbxLink information in
Element Manager
Procedure 44
Displaying pbxLink information in Element Manager
Step
1
2
3
4
5
CLI
To display the pbxLink information for a CS 1000E system, use the LD
117 STAT SERV command at the Command Line Interface (CLI) of the
Call Server.
Action
In the EM navigator System menu, select IP Network >
Maintenance and Reports .
The Node Maintenance and Reports page appears.
Click GEN CMD to the right of the Call Server information line.
Select pbxLink from the Group list.
Select pbxLinkShow from the Command list.
Click Run.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
Figure 53 "Displaying pbxLink
184).
--End--