Nortel Communication Server 1000E Maintenance Manual page 163

Table 36
Media Card faceplate maintenance display codes (cont'd.)
Normal code
T:13
T:14
T:15
T:16
T:17
T:18
T:19
T:20
T:21
T:22
If the IXP encounters any failures during its initialization, an H:XX error
code is displayed.
163) shows the list of error codes:
Table 37
List of error codes for the Media Card
Code
H:00
H:01
H:02
H:04
H:08
H:10
H:20
H:40
H:80
Media Card error messages
When an error or specific event occurs, SNMP sends an alarm trap to any
SNMP manager that is configured in the SNMP Manager's list in the ITG
Card properties. It also puts the system error message into the error log
file containing error messages.
Communication Server 1000E Maintenance
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
Faceplate maintenance display codes 163
Corresponding
Fault code Message
F:13 Testing SEEPROM
F:14 Booting Host processor, waiting for
response with self-test information
F:15 Not used at present
F:16 Not used at present
F:17 Not used at present
F:18 Not used at present
F:19 Not used at present
F:20 Waiting for application startup message
from Host processor
F:21 CardLAN enabled, waiting for request
configuration message
F:22 CardLAN operational, A07 enabled,
display now under host control
Table 37 "List of error codes for the Media Card" (page
Description
Host Processor not booting
SDRAM test failure
SRAM test failure
PC Card device failure
Network interface failure
CS 1000E interface failure
DSP interface failure
NVRAM/EEPROM interface failure
PCM connector failure
Nortel Communication Server 1000
NN43041-700 04.01 4 June 2010