Pri Trunk To Tie Line Connection With Pad Control - NEC NEAX 2400 IPX Programming Manual

P-39

PRI TRUNK TO TIE LINE CONNECTION WITH PAD CONTROL

1. General Description
This feature provides a switchable transmission pad for PRI trunks, which allows tandem connections.
Necessary PAD CONTROL is activated to protect against echo.
2. Operating Procedure
No manual operation is required.
3. Programming
STEP 1: APAD - Assign the Pad data required for the Tandem connection. Assign the following:
KIND: T (Tandem Connection) or S (Station)
ICRT: Incoming Route Number
OGRT: Outgoing Route Number
SFC:
IC PAD:
OG PAD:
RT:
PAD DATA:
Note: See "Circuit Card Manual".
PRI TRUNK TO TIE LINE CONNECTION WITH PAD CONTROL
Service Feature Class
Incoming PAD Data (1-15)
Outgoing PAD Data (1-15)
Route Number
Note
NDA-24305 CHAPTER 5
Page 131
Revision 1.0