Cd-Rom And Fdd Installation - Acnodes PC 1150 User Manual

All-in-one 15.1” super slim panel pc

Hide thumbs Also See for PC 1150:

Table of Contents

PANEL1150-370 15.1" All-in-One PANEL PC User's Manual

1. Remove the 3 screws securing the riser card assembly's

back cover. Take off the cover by sliding it outward and

pulling it upwards as pointed by the arrows. If your

system does not come with a riser card assembly,

proceed to step 2.

2. Another 6 screws, located on the upper perimeter (3) and

lower half (3), needs to be removed. These screws are the

screws bolting the system's rear cover to the main unit.

3. You may now take off the system's rear cover (along with

the riser card assembly).

4. See the illustration for the exact locations of your HDD,

CPU and DRAM sockets.

5. After making the necessary upgrades or modifications to

your HDD, CPU, and DRAM, restore the system back to its

original form by following instructions 4 to 1.

3.2