Pnp/Pci Configuration Setup - Acnodes PC 8150 User Manual

PC 8150 User's Manual
A.10

PnP/PCI Configuration Setup

This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
Init Display First
This item allows you to decide to active whether PCI Slot or
AGP first. The options available are PCI Slot, AGP.
Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to
reset Extended System Configuration Data (ESCD) when you
exit Setup or if installing a new add-on cause the system
reconfiguration a serious conflict that the operating system
can not boot. Options: Enabled, Disabled.
Resources Controlled By
The Award Plug and Play BIOS can automatically configure all
boot and Plug and Play-compatible devices. If you select
Auto, all interrupt request (IRQ), DMA assignment, and Used
DMA fields disappear, as the BIOS automatically assigns
them. The default value is "Manual".
IRQ Resources
When resources are controlled manually, assign each system
48 Appendix