Table of Contents
Advertisement
A.2.6
PNP/PCI Configuration
This section describes the PCI bus system configuration. PCI or
Personal Computer Interconnect is a system which allows I/O devices
to operate at speeds nearing the speed of the CPU when
communicating with its own special components. This section covers
some very technical items, and it is strongly recommended that only
experienced users should make changes to the default settings.
Phoenix – Aw ard BIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
: Mo ve
Ent er: Se le ct
F5 : Previous Value s F6: Fa il- Saf e Defaults F7: Optimized Defaults
Reset Configuration Data
Normally, this field is "Disabled". Select "Enabled" to reset Extended
System Configuration Data (ESCD). When exiting Setup or installed a
new add-on, the system reconfiguration has caused such a serious
conflict that the operating system cannot boot. The options available are
Enabled and Disabled.
Resource controlled by
The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot and the Plug and Play compatible devices.
However, this capability means absolutely nothing unless using a Plug
and Play operating system such as Windows→98. The options available
are Auto and Manual.
PCI/VGA Palette Snoop
Leave this field at "Disabled".
The choice: Enabled, Disabled.
Appendix
PC6150/FPC6150 User's
Disabled
Auto(ESCD)
Menu Level
Press Enter
Select Yes if you are
using a Plug and play
Disabled
capable operating
system select No if
you need the BIOS to
configure non-boot
devices
+ /- /P U/ PD: Va lue
F 10 : Sa ve
F1 : Gen era l H elp
Manual
Item Help
ESC: Exit
49
Advertisement
Table of Contents
