Installation; Operation; General; Gsdml File - ProMinent DULCO flex Control Original Operating Instructions

4.4 Installation

Bus installation

4.5 Operation

4.5.1 General

4.5.2 GSDML file

Supplementary Operating Instructions for PROFINET
If the metering monitor is set to
or an error with DULCO flex Control DFXa.
CAUTION!
Degree of protection IP 65
– IP 65 degree of protection only applies if the
appropriate assembly accessories (cable open‐
ings etc.) have been fitted correctly.
The connection to the existing LAN infrastructure is provided by a
suitable LAN cable, e.g. twisted pair cable (CAT5 or higher) to
comply with IP 65 with a screwed M12x1 plug, 4-pin, D-coded to
IEC 61076-2-101. Complies with IEEE 802.3.
Tab. 39: Connectors
Module label
OUT
IN
Mains extension:
Copper-based twisted pair cable (TP) maximum 100 metres.
n
Using the connected PROFINET
FINET ® represents a device with slave functionality. User data is
then transmitted cyclically.
Use the GSDML file to configure the master. The GSDML file
describes all the features of the pump in PROFINET
words, diagnostics, modules, sub-modules). The GSDML file can
be downloaded from the PROFINET
nent website. The file name is clearly indicated:
GSDML-V2.35-Prominent-DFXa-20191118.xml.
'Active' , it issues either a warning
Meaning
Port 1
Port 2
module, the pump in the PRO‐
®
® mode (key‐
® website and from the ProMi‐
®
65