ProMinent DULCO flex Control Original Operating Instructions page 59

Order number
52
53
54
55
61
62
71
72
81
82
91
92
93
94
95
96
101
102
103
104
Supplementary operating instructions for PROFIBUS
Name
Metering time batch mode
Batch start
Batch memory
Remaining volume batch mode
Volume per contact "contact
mode"
Contact memory
Setpoint final concentration
Actual value of final concentration
Error
Warnings
Reset stroke counter
Reset metering quantity counter
Deletable stroke counter
Deletable metering quantity
counter
Litres per stroke
Hose service life
Identity code
Serial number
Pump name
Installation site
Explanation
Time in which the batch volume is
to be delivered
Start batch metering by changing
"1" to "0"
If "1", the volume to be delivered
is added up for each additional
batch contact; if "0", the remaining
volume is cleared and a new
batch process is started
Remaining volume to be metered
in batch mode
Volume to be delivered with con‐
tact in contact mode
If "1", the volume to be delivered
is added up for each additional
batch contact; if "0", the remaining
volume is cleared and a new con‐
tact process is started (same as
"batch memory")
Desired final concentration in con‐
centration mode
Current final concentration in con‐
centration mode
- see "DULCO flex Control DFXa
data objects" table
- see "DULCO flex Control DFXa
data objects" table
Reset stroke counter by changing
"1" to "0"
Reset metering quantity counter
by changing "1" to "0"
Number of strokes since the last
reset
Totalled metering volumes since
the last reset
Litres per stroke
- see "DULCO flex Control DFXa
data objects" table
Pump identity code
Pump serial number
Pump name, freely determinable
Installation site, freely determi‐
nable
®
59