Xilinx Zynq-7000 User Manual page 41

Graphical User Interface
The GUI for this Base TRD is designed using the Qt framework (see
X-Ref Target - Figure 2-6
In Figure 2-7, the grey screen at the bottom is the GUI. The GUI can be minimized or
maximized with the MIN/MAX button on the right side. The complete screen is the Video
(or display) area, where the pattern or video is displayed. There is a Transparency slider that
makes the GUI semi-transparent. The bottom portion of the GUI consists of the ZYNQ
banner, a pictorial view of Operation Mode and two graphs, which are only available in the
MAX GUI mode. All other controls are available in both the MAX and MIN GUI mode.
X-Ref Target - Figure 2-7
Zynq-7000 AP SoC ZC702 Base TRD
UG925 (v6.0) February 21, 2014
Figure 2-6: GUI for TRD Application
Figure 2-7: Minimized GUI Mode
www.xilinx.com
Software Architecture
Figure 2-6).
UG925_c2_06_011014
UG925_c2_07_011014
41
Send Feedback