BRP Rotax 915 i A Series Maintenance Manual page 59

Points of Inspection
* no periodic maintenance (require-
ment after the first 25 hours of
operation)
Check that spark plug connectors fit
tightly on the spark plugs. Minimum
pull-off force is 30 N (7 lb).
Remove all spark plugs and check for
spark plug defects (deposits, melt-
ing,...). Check if GENUINE-ROTAX®-
spark plugs are used.
Replacing spark plugs.
(2 use of leaded fuel more than 30% of
operation
Check the magnetic plug.
Remove oil filter from engine. Cut old
filter without producing any metal chips
and inspect following components for
wear and/or missing material
Filter mat:
Findings:
______________________________-
______
(3 use of leaded fuel more than 30% of
operation.
General visual inspection of the engine
for damage or abnormalities. Check
cooling air duct and cooling fins of the
cylinders for obstruction, cracks, wear
and good condition. Take note of
changes caused by temperature
influence.
Effectivity: 915 i A Series
Rev. 1
BRP-Rotax
MAINTENANCE MANUAL LINE
Interval Operating hours
25* 50 100
3) Spark plug
X X
X (2
4) Inspecting the magnetic plug
X X
5) Inspecting the oil filter
X (3 X
6) Visual inspection of the engine
X X
Reference
200 600 1000
X 12–20–00
Inspection of
spark plugs
12–20–00
Remove the
spark plugs
X 12–20–00
Installation of
spark plug
12–20–00
Inspecting
the magnetic
12–20–00
Inspection of
the oil filter
components
12–20–00
inspection
Chapter Signa-
ture
plug
Visual
05–20–00
Page 9
June 01 2019