BRP Rotax 915 i A Series Maintenance Manual page 146

Step
Reconnect negative terminal of aircraft battery.
See
Equipment
Equipment is to be inspected in accordance with the Maintenance Manual of the
12–20–00
Page 36
June 01 2019
MAINTENANCE MANUAL LINE
The oil level in the tank must not drop below the end of suction pipe, otherwise
Procedure
1 Turn engine by hand in direction of engine rotation to return the oil from the
oil from the oil tank into the engine and into the collection container. The
procedure is complete when no more contamination can be discovered.
2 Control the oil captured during the rinsing process. The rinsing process is
complete when no more contamination can be discovered.
3 Re-install cleaned oil lines and oil cooler according to the manufacturers
instruction.
4 Install new oil filter and refill with oil.
5 Purge oil system.
Chapter 12–20–00 section Purging of the oil
BRP-Rotax
ATTENTION
air will be sucked in again.
system.
ATTENTION
aircraft manufacturer.
Effectivity: 915 i A Series
Rev. 1