LEAK TESTS
General note
Instruction
To check the following steps are necessary:
Step
CHECKING THE FUEL LINES
General note
See
Instruction
Step
CHECKING THE FUEL PRESSURE REGULATOR
General note
Step
Effectivity: 915 i A Series
Rev. 1
MAINTENANCE MANUAL LINE
Avoid over-tightening the fastening elements. Use a suitable torque wrench for
Procedure
1
Inspect all fuel lines (steel on engine), their connections and unions.
2
Inspect the fuel lines (steel on engine) for sign of chafing.
Chapter 05–10–00 section Time limit for
Procedure
1
Check fuel line (of steel).
Procedure
1
Check the fuel pressure regulator (1) for damages and inspect the general
condition.
2
Perform a leak test (Fuel pumps "ON").
3
Inspect all connections (2) for secure attachment.
BRP-Rotax
ATTENTION
all work.
parts.
12–20–00
Page 23
June 01 2019