Exceeding The Max. Permissible Oil Temperature - BRP Rotax 915 i A Series Maintenance Manual

EXCEEDING THE MAX. PERMISSIBLE OIL TEMPERATURE

General note
NOTE
Any exceeding of the max. admissible oil temperature must be entered by the pilot
into the engine log book, stating duration extant of excessive temperature and
pertinent detail.
Read out the ECU data memory and check the data for details of increased oil tempera-
ture. Perform the corresponding inspections/repairs depending on the functional defects
found.
160 °C
(320 °F)
Figure 5.14: Overview and proceed
05–50–00
Page 22
June 01 2019
BRP-Rotax
MAINTENANCE MANUAL LINE
If the max. permissible oil temperature is exceeded, other limits are often ex-
ceeded, too, e.g. the cylinder head temperature. Please observe the relevant
Proceed as instructed
in table 4
Proceed as instructed
in table 3
Operating limit
(See Operators Manual 915 i Series)
0
ATTENTION
instructions.
15 min. Time
Effectivity: 915 i A Series
Rev. 1