BRP Rotax 915 i A Series Maintenance Manual page 124

Figure 7.6: Locking/Loosen of the crankshaft. TYPICAL
Plug Allen screw M8x20 (crankcase) with sealing
1
ring 8x13
3 Crankshaft
Loosening of the After completion of work/check:
crankshaft
Step
12–20–00
Page 14
June 01 2019
BRP-Rotax
MAINTENANCE MANUAL LINE
Procedure
1 Remove the thread bolt (2) and refit crankshaft plug Allen screw M8x20 (1)
along with a new sealing ring 8x13 (lock pin) with a dry torque of 15 Nm
(133 in.lb).
Thread bolt (locking pin)
2
Effectivity: 915 i A Series
Rev. 1