Fluid Capacities - BRP Rotax 915 i A Series Maintenance Manual

General note
The operation of the engine may be adversely affected if non-approved or conta-
System Overview
Fuel system
Cooling
system
Oil system
NOTE
BRP-Rotax can give an approx value on the fill capacity depending on aircraft de-
sign and positions of radiators and tanks. The volume may differ from this value.
Always check the relevant specifications provided by the aircraft manufacturer.
Effectivity: 915 i A Series
Rev. 1
MAINTENANCE MANUAL LINE

FLUID CAPACITIES

minated fuel, oil or coolant are used. Any mixing of different manufacturers and
types should be avoided. The use of additives may result in damage.
See Operators Manual for the engine type 915 i A Series.
System
Refer to the relevant specifications
provided by the aircraft
manufacturer.
Approx. 1.5 l (0.4 US gal.).
MIN mark corresponds to 2.5 l
(0.66 US gal.) and MAX mark cor-
responds to 3.0 l (0.8 US gal.).
BRP-Rotax
ATTENTION
Fill capacity Details about the operating
fluids
Refer to the corresponding chap-
ter in the Flight Manual.
Refer to the corresponding chap-
ter in the Operators Manual.
Refer to the corresponding chap-
ter in the Operators Manual.
12–10–00
Page 3
June 01 2019