General - BRP Rotax 915 i A Series Maintenance Manual

Purpose The purpose of this Manual is to provide aircraft manufacturers with technical require-
ments (e.g. interface descriptions and limitations) that must be adhered to when installing
this type of engine into an aircraft or certifying aircraft powered by this engine type. Fur-
thermore it should allow independent ROTAX® Maintenance Technicians (iRMT) to install
this engine into an airframe in compliance with the relevant installation and safety instruc-
tions provided by the engine manufacturer.
For detailed information related to aircraft and aircraft/engine installation, maintenance,
safety or flight operation, consult the documentation provided by the aircraft manufacturer
and/or its dealer.
For additional information on engines, its maintenance or parts, you can also contact your
nearest ROTAX® authorized Aircraft Engine Distributor or their independent Service
Center.
ROTAX For ROTAX® Authorized Distributors for aircraft engines see latest Operators Manual or
Distributors the official website www.FLYROTAX.com.
Engine serial When making inquiries or ordering parts, always indicate the engine serial number. Due to
number continuous product improvement, engines of the same engine type might require different
support and spare parts.
The engine serial number is on top of the crankcase, behind the propeller gearbox.
Figure 1.1: Engine serial number
00–00–00
Page 2
June 01 2019
BRP-Rotax
MAINTENANCE MANUAL LINE

GENERAL

Engine serial number
1
Effectivity: 915 i A Series
Rev. 1