Time Limit - BRP Rotax 915 i A Series Maintenance Manual

General
The time limit for engine operation will be specified by the TBO.
After reaching
this time limit
For an overhaul, the engine must be removed from the aircraft, be cleaned, preserved
and all openings to be closed to prevent entering of contaminants.
Storage period of Observe the storage and preservation directives!
the engine
NOTE
The maximum possible storage period of the engine is limited to 24 months.
If this period is exceeded, the engine must be sent to a ROTAX® authorized overhaul fa-
cility for inspection.
For the TBO of the specific engine type/version refer to the table below.
Authorized Extension or exceeding of the TBO by 5% or 6 months is allowed, whichever comes first.
exceeding
Shipment The shipment to an authorized ROTAX® overhaul facility must include the following:
05–10–00
Page 4
June 01 2019
MAINTENANCE MANUAL LINE
A general overhaul is due after a defined period of operation or after a specified
calendar life since initial start of operation (whichever comes first).
After reaching this time limit, the engine has to be shipped to an authorized
Engine Engine affected engine S/N
Type description
915 iSc from start of production
(EASA certified)
915 iS from start of production (ASTM
compliant)
1 Engine log book.
2 Maintenance records of the engine (i.e. all maintenance check lists, and re-
ports of operation, of maintenance, of findings and of oil analysis).
BRP-Rotax

TIME LIMIT

ATTENTION
ATTENTION
ROTAX® overhaul facility.
TBO
Time Between Overhaul
1200 h or 15 years, whichever
comes first
1200 h or 15 years, whichever
comes first
Effectivity: 915 i A Series
Rev. 1