BRP Rotax 915 i A Series Maintenance Manual page 41

Additional
materials
Use only the specified or technically equivalent materials from BRP-Rotax for all
maintenance work. When handling chemicals, comply with all the customary reg-
ulations and specifications of the producer, including the expiry date and instruc-
Effectivity: 915 i A Series
Rev. 1
MAINTENANCE MANUAL LINE
part no.
No.
n.a
1 Cleaning agents
Soak combustion chamber, piston and cylinder
head with cleaning agent and remove combustion
residues with a bronze brush. CASTROL "Clenvex
2000" has proved very effective. It is a solvent - cold
cleaner, free of halogen, on the basis of selected
fuel fractions and is biodegradable. Never use
caustic or corrosive cleaning agents.
n.a
2 Preservation oil
This special oil has excellent penetrating capabil-
ities and reaches even tiny gaps, its highly effective
additives protect against corrosion of metal
surfaces.
n.a
3
Abrasive pad for surface finishing 3M Scotch-
Brite Multi Flex - very fine or ultra fine
Is sold by the meter and used for manual removal
of smaller rust spots or oxidation, especially for opti-
mum ground connections. It is particularly suitable
for removing LOCTITE from surfaces or threads to
make them metallic clean. Before re-applying LOC-
TITE, clean surfaces with nitrothinner or degreasing
agent (CASTROL ZA 30 or OMV - SOFT SOL).
When using solvents, observe the safety regula-
tions for persons and the environment.
n.a.
4 Valve lapping paste
This paste, produced by various manufacturers, is
a fine granulate lapping paste for manual lapping of
valve seats and valves. The paste is usually avail-
able in 3 different granulate sizes. Use as per man-
ufacturers instructions.
BRP-Rotax
ATTENTION
tions of use.
Description, Application Qty.
AR
AR
AR
AR
05–00–00
Page 9
June 01 2019