Exceeding Of Max. Coolant Temperature - BRP Rotax 915 i A Series Maintenance Manual

EXCEEDING OF MAX. COOLANT TEMPERATURE

General note
NOTE
Any exceeding of the max. admissible coolant temperature must be entered by
the pilot into the engine log book, stating duration, extent of excess temperature
and pertinent detail.
Figure 5.13: Overview and proceed:
Temperature exceeded briefly
Step
Effectivity: 915 i A Series
Rev. 1
MAINTENANCE MANUAL LINE
If the maximum coolant temperature is exceeded, other limits are also often ex-
ceeded, e.g. oil temperature. Please observe the relevant instructions.
Proceed as instructed
in table 2
135°C
(275 °F)
Proceed as
instructed in table 1
0
Table 1: Temperature exceeded less than 30 min.
Procedure
1 The whole cooling system must be inspected, repaired or overhauled in ac-
cordance with the BRP-Rotax instructions for continued airworthiness.
BRP-Rotax
ATTENTION
Operating limit
(See Operators Manual 915 i Series)
30 min. Time
05–50–00
June 01 2019
Page 19