Protecting Memory Card Files - Nortel Versalar 15000 Installing And Maintaining

Installing and Maintaining the Versalar Switch Router 15000

Protecting Memory Card Files

Nortel Networks ships each memory card with its read-write protect switch in the
unprotected position. After successfully loading the configuration file and saving
your configuration, you might want to write-protect the memory card for backup
purposes.
Note: You typically do not operate a Versalar 15000 with a write-protected
memory card. You should make a copy of your configuration on another
memory card, write-protect that card, and store it in a safe place.
To change memory card protection:
Remove the memory card access cover by squeezing the sides of the cover
1.
at the top and bottom
Remove the memory card from the Versalar 15000:
2.
a.
b.
Caution: You must remove the card from the Versalar 15000 before changing
the read-write protection. Failure to remove the card may result in improper
write protection.
Locate the read-write protect switch on the edge opposite the arrow on
3.
the memory card
5-10
(Figure 5-4 on page
Press the eject button above the memory card receptacle
on page 5-8).
Pull the card out of the card receptacle.
(Figure
5-7).
5-7).
(Figure 5-5
308684-B Rev 00