Installing and Maintaining the Versalar Switch Router 15000
Figure 3-12.
Installing an AC Power Module
To install an AC power module in the separate AC power unit:
Ensure that the circuit breaker is turned on.
1.
Verify that the input voltage cable is connected at the back of the chassis.
2.
Attach the antistatic wrist strap.
3.
For instructions, see "Attaching the Antistatic Wrist Strap" on page 4-3.
If you are replacing a failed power module, remove the failed module.
4.
3-20
B
A
Mounting the Separate AC Power Unit
VRS0134A
308684-B Rev 00