Figure 4-19. Connecting A Console Cable To A Terminal With A 25-Pin Comm Port - Nortel Versalar 15000 Installing And Maintaining

Installing and Maintaining the Versalar Switch Router 15000
Insert the 9-pin receptacle end of the console cable into the console
2.
connector on the SSP interface console card
Min
Alarm
Console
Figure 4-19.
Attach one end of the null modem crossover adapter to the 25-pin plug
3.
connector on the console cable, then tighten the screws. Refer to
Figure 4-18
Attach the 25-pin receptacle end of the console cable-plus-adapter to the
4.
optional standard AT serial cable, if desired
Connect the complete cable unit to the terminal's comm port connector
5.
(Figure
4-30
Rear of chassis
SSP-C interface console card
slot 10
Pwr
SSP Interface
Cosole
Maj
Alarm
Mute
Console cable
Alarm
Min NO
Min COM
Min NC
Maj NO
Maj COM
Maj NC
Connecting a Console Cable to a Terminal with a 25-pin
Comm Port
on page
4-19).
COMM
20 mA
4-28.
(Figure 4-19).
KB
PR
Optional standard AT
serial cable with 25-pin
connectors
Null modem crossover adapter
VRS0143A
(Figure 4-19).
308684-B Rev 00