Figure 4-8. Removing An Interface Card - Nortel Versalar 15000 Installing And Maintaining

Captive
screws
Figure 4-8.
4.
5.
6.
308684-B Rev 00
Installing Processor and Interface Cards and Connecting Equipment
Removing an Interface Card
Pull on both card handles until the interface card begins to come out of
the chassis.
Rest the edge of the interface card on the palm of one hand, and with the
other hand, pull the card out of the chassis.
If you are installing a replacement interface card, go to the next section.
Otherwise, install an air flow module.
Card
handles
VRS0019A
4-13