Nortel Versalar 15000 Installing And Maintaining page 128

Installing and Maintaining the Versalar Switch Router 15000
Holding the interface card by its top and bottom edges, orient the card so
4.
that the EMI card shield is on the right
Figure 4-10.
Align the interface card with the chassis slot arrows above and below the
5.
card slot.
Holding the card handles open, slide the interface card into the slot using
6.
the card guides
Insert the card until its connector panel touches the Versalar 15000 back
7.
panel.
4-16
EMI
card
shield
VRS0062A
Positioning an Interface Card
(Figure 4-11).
(Figure 4-10).
308684-B Rev 00