Figure 4-21. Connecting A Modem To The Versalar 15000 - Nortel Versalar 15000 Installing And Maintaining

Installing and Maintaining the Versalar Switch Router 15000
Insert the 9-pin receptacle end of the console cable (Order No. 110307)
2.
into the modem connector on the SSP card
Pwr
SSP
Temp Fan Maj Min
Diag Test Count
3
Modem
SQUEEZE TO REMOVE
Boot Flash
Option Cards
SQUEEZE TO REMOVE
Figure 4-21.
Insert the 25-pin plug connector at the other end of the console cable into
3.
the modem's RS-232 data communications port.
Two SSP cards, each with a modem, can share the same dial-up line
The data terminal ready (DTR) signal on the modem port follows the active SSP
card. Only the modem that is attached to the active SSP card answers the phone.
4-34
Front of chassis
SSP card
slot 9 or 10
Stat Run Mstr
2 1 0
Console cable
1
3 2
Connecting a Modem to the Versalar 15000
(Figure
PHONE DIAL NMS
DWR (LEASE (LEASED)
3810 3810
BAC0043A
4-21).
(Figure 4-22).
308684-B Rev 00